A few things to fix

feeds@yuku.com (fastglass1) — Thu, 29 Oct 2009 08:08:22 GMT

I just put together a list of things I need to work on over the winter.

Jackplate - does not move

Trim Motor - dead

Temp Gauge (wiring) - connector crimp failed

Live Well Trouble

feeds@yuku.com (StrokerJeff) — Sat, 24 Oct 2009 16:16:24 GMT

Need some help guys with the plumbing. The well won't hold water. I think I would like to replace the 2001 system. I can't seem to get it all to work at the same time. Just want the well to work with a flip of the switches. Any suggestions would be great.

You may miss seeing me at the rally

feeds@yuku.com (fastglass1) — Fri, 16 Oct 2009 07:05:04 GMT

as I have hit my goal of loosing 28 lbs. I have not been this lite in about 8 years. I am going to...

Detwiler Jack plate

feeds@yuku.com (Stroker Z) — Wed, 14 Oct 2009 11:42:48 GMT

You guys need to inspect your detwiler plates, paying close attention to the area around the stainless counter sunk cap screws. My plate had a major failure 2 of the cap screws broke off and the plate structure has cracks near the counter sunk holes additionally a piece of the bracketing structure broke off above one of the holes. The damage is not from impact on the L/U or prop. I've got some pics if I can figure out how to post them

Whining

feeds@yuku.com (Danny Hare) — Fri, 09 Oct 2009 13:15:58 GMT

Geez don't know why I'm whining. It was only 96 here today with about 10,000 percent humidity. I've been in this state a long time and summer for summer this is the hottest I can remember. Rain and water levels are going to be another issue later.

Even though we had some serious rain early in the summer it has been powder keg dry since.

Unless we can get in a late tropical front this is going to be a real dry winter. We do have a of droughts here people just...

Back in the fun game a little

feeds@yuku.com (Danny Hare) — Thu, 08 Oct 2009 18:38:13 GMT

All right couldn't resist the temptation.

Bout to get my hands on a 32 Performer ET cut. Maybe by the rally I'll be able to drive it. I haven't had a real performance wheel in some time. I have a little 2800 acre lake right down the road that I can use for an excuse to fish. Gee once it cools off to under 300 degrees I'll give it a shot.

I ain't worried about haulin another big butt fishin just this old fat man and his tackle.

I think Big...

Welcome

feeds@yuku.com (1badboat) — Thu, 01 Oct 2009 12:05:31 GMT

Dan and I would like for you to join us in welcoming 2 new moderators to this board.
Strokedyamaha- Paul Hotman
Stroker300X - Kurt Mourer
Both Strokedyamaha and Stroker300X has many hours of seat time in a Stroker and a lot of helpful knowledge.

Welcome guys

Set ups

feeds@yuku.com (1badboat) — Sat, 26 Sep 2009 05:17:14 GMT

I've been reading on the net some discussion on set ups. I think there are more people experimenting with their set ups trying to get the most out their boat. Let's hear what everybody is running for set ups, past experience and current. What year boat, motor (has it been modified and what has been done to it), prop, what kind a fishing load, ect. as much information you can that you think will be helpful to someone that may be running something close to yours.

Hoss Triton Prop

feeds@yuku.com (Danny Hare) — Fri, 25 Sep 2009 13:25:19 GMT

Has anyone run a Hoss Triton 3 blade lately ?? They look a lot like a Allison cut chopper. I thought I have read of a few running good on 2003 Allisons.

Lookin to maybe get me another 3 blade. Thinkin of a 32 ET too.

Dan

02 Stroker Hull and Trailer!!!!

feeds@yuku.com (stacybaum) — Mon, 07 Sep 2009 14:31:17 GMT

2002 stroker and 2002 Boatmate trailer $15000

Rigged for a Yamaha, all controls still in boat, just need motor and oil tank. Detwiler Hydraulic plate, Minkotta Maxxum 80 LB, Anodized bezels and grab handle, custom steering wheel, Dual blinker, plate trim, Hydraulic steering, Deck extension.

...

New 2010 Stroker on order!

feeds@yuku.com (strokedyamaha) — Sun, 06 Sep 2009 04:41:04 GMT

the 09 is gone and I am missing it.....should have the 2010 in the near future cant wait! colors are black ozark bottom yellow with a blue arow and black consoles

Happy B-Day Alice

feeds@yuku.com (1badboat) — Thu, 03 Sep 2009 13:04:15 GMT

Happy B-Day Alice Hope you have a good one Darlin

Happy B-Day Dan Hare

feeds@yuku.com (1badboat) — Mon, 24 Aug 2009 07:59:51 GMT

Happy B-Day Dan, Hope you have a good one and many many many more.

Man this bright light is tough

feeds@yuku.com (Danny Hare) — Fri, 21 Aug 2009 13:25:33 GMT

Anybody had eye surgery lately ?? I'm going through restorative surgery in both eyes right now. Boy I'm off the scale right now on light sensitivitiy. Each day it is getting a little better but I have been tombed up so to speak for the last three weeks. Even using the computer I'm wearing dark glasses.

The ultimate goal is 20-20 or better in each eye.

I'm about 50% through the peocess now there so there is a end to this in sight LOL. The doctor wants to...

How to my Stroker over 85

feeds@yuku.com (bmcarter03) — Thu, 06 Aug 2009 18:45:38 GMT

Hey guys I finally got my Stroker up to 77.6 the other day before it started rocking and scared me LOL. Seriously I want to get it faster and need help. I'm sure you guys will want to ask questions and I don't know where to begin so ask away. I will tell you it's a 98 stroker with a 2004 Mercury EFI 250 3L on the back. The pad has had that special thing done to it forgot what its called. The prop is a four blade 28 pitch and have three holes pluged ( don't know what brand...

Spark Plugs

feeds@yuku.com (bmcarter03) — Thu, 06 Aug 2009 18:38:32 GMT

I was wanting to know if anyone had an answer to what spark plug is best for a 2004 3.0L Mercury EFI 250 outboard? Can u use an Iridium plug. I have a 98 Stroker that it sits on. Brent

Where is everybody

feeds@yuku.com (1badboat) — Thu, 06 Aug 2009 04:41:49 GMT

sure has been quite on here where is everybody? what has everybody been doing?

2010 Stroker Rally

feeds@yuku.com (1badboat) — Wed, 15 Jul 2009 06:23:53 GMT

Dan and I have been talking about the 2010 Stroker Boat rally and the dates that some of you mentioned. We are looking at March 26,27,28. 2010 at J.P. Coleman state park. After talking to everyone at the rally last year we have decided that J.P. Coleman is the best place for the rally. So how do you all feel about the dates we are looking at?

motor height

feeds@yuku.com (bamaboy) — Sun, 12 Jul 2009 09:58:40 GMT

wondering what a good average (min & max) to the pad. don't think i have ever actually heard

Blairs 118 mph Stroker

feeds@yuku.com (Stroker300x) — Thu, 09 Jul 2009 17:29:16 GMT

Stroker Boats Message Board